greenv8s
I am not able to envision what you have described.
But, for it's simplicity, I like the center-mast stream, or narrow cone (preferred) idea. But again, anything located close to the blades will be an airflow disruption, and I think a good rule is to keep at least 2 diameters away from it. Then pray your install never get's loose! For many, there is a bend in the intake close to the blades (considered bad design) and that may limit how close you can get anyway.
If only someone can come up with an easily serviced coaxial alignment. The wall nozzle has that advantage. Someone can do it, to make this idea practical.
__________________
Michael Patton (aka Killerbee)
|