i was thinking of maybe adding one of those inline check valves in the pre-comp line.
something along the lines of if i got 15+ psi after the intercooler, i could try and balance the flow between the 2 jets with a 15psi valve at the compressor.
although just read aquamist's website..
http://www.aquamist.co.uk/sl/plist/p...8/806-248.html
Quote:
|
Recently it has been used for twin jet application where water is again being siphoned between the jets due to pressure in-balance and causes unnecessary delay during injection. Twin-jet application requires two check valves and must be installed immediately after the jets.
|
maybe thats what your supposed to do anyway.
Drew