Quote:
Larry I was wondering what size nozzle you are running pre-compressor. If I remember correctly you have a Shurflo pump, correct?
Do you have post-turbo injection as well?
|
Well at the moment I'm getting ready to re-configure things. My old setup was pre-compressor only and a 3 to a 4 gal/min nozzle. That was too much water in retrospect so I decided to rebuild the system.
I will be adding pre-throttle body nozzles and reducing the pre-compressor nozzle size probably to a 2 gal/hr or a 1 gal/hr rate.
My system uses a shurflo 100 psi pump and a shurflo 24 fluid ounce accumulator (pn 181-203) and the trigger solenoid sits within inches of the nozzle, so the turn on time is very short, with a large accumulator at 80-90 psi feeding the solenoid.
Larry