Quote:
|
Originally Posted by Richard L
4x 785 x 65% = 2041cc/minute of fuel.
Based on 10-15% of water to fuel, the jet size should be between 0.5mm (225cc/m) - 0.8mm (300cc/m).
|
how does this work in gal/min? I did the conversion online... but I'm just not sure.... My lancer runs 550's and I'm pretty sure I'm running around 90% on the injectors so by that math 4*550*.9=1980cc/min therefore 15%=297cc/min which is .8mm for your setup, but the injectors I work with are rated in gpm and the online conversion tells me that 297cc/min = .08gal/min ....but the jets are rated at numbers like 4.9. That must be gallons/hour right? b/c .08*60=4.8. Sound abour right?? :roll: