Quote:
|
Originally Posted by dsmtuned
I worry about what the 4mm line will do inside the intake. I mean the hose is not very areodynamic itself. Do you plan on running the line next to the inside wall of the intake?
Nice job on that jet holder by the way!
-Craig
|
Not sure what to do yet with the 4mm line, the bracket will only serve to obtain some results on the dyno. I think the 4mm line will exit the inlet tract a little way towards the air filter.
I am sure it will flap around but when the line is pressured at 7 bar, it become quite stiff. Ideally the water channel can be incorporated into one of the fins of the bracket.