Is it that the 0.6 jet is too large for that application ?, are you measuring the spray via an HSV , or is it a "dump" type set up ?. I recently ran a set up using a pre compressor 0.9mm jet via an HSV , I did this for about 8 or 9 months and had no problems what so ever , I am now running twin turbos and had planned to use a pair of 0.4mm jets , one in the suction of each turbo , and an HSV to control the delivery to both jets, Now I'm not so sure abou doing that ! :sad: , this is very disturbing !!
|