Newest drama is that the wiring is correct. I rewired everything this morning and I believe I found the problem. When the pump is running, there isn't any power going to the priming pump. I think either the pressure switch (806-162) might be shot or the priming pump circuit might have blown. I did notice that the priming pump would click on for a second or two at random. Even if the water injection wasn't activated, the priming pump would still fire up for a second or two. Thinking that the system was loosing pressure, I checked for leaks or kinks and found nothing. The priming pump relay is getting power, but the relay won't activate.
|