So all of the wiring was good, the connection for the pump was kinda shot though. The center pin never made a solid connection. When I moved it back and forth, the pump would shut off. Everything was great other than the priming pump that kept running after. I turned the screw on the water manifold about 1/4 turn and it shut off. Will that make a big difference in the performance of the pump?
On a side note, thanks for your help guys. Richard, you have a great product and your customer support is excellent. I was a little frustrated after I put all this time into wiring and making it look clean just to have it go to hell on me the first track I go to. It worked great for a grand total of a day, 2 if you count the drive to the track. But anyway, great product and I appreciate your help very much.
chris chicoine
|