Manifold pressure switch
I have a devils own pump connected to a Aquamist HSV.
I know the Devils own pump has an internal pressure switch, but as my install is boot mounted i have fitted the MPS closer to the HSV to try and maintain a constant pressure.
I also plan on setting the pump PS slightly higher than the MPS so that i have a little over pressure insurance.
My question is on wiring though, on the Aquamist wiring diagrams i've seen so far you have the MPS connected to ground on 1 side and a third pump input on the other.\
I have wired the MPS with ground one side and the other to the pumps ground input but the pump does not turn on.
How should i connect it?
|