Ok, so I want to install a jet before the supercharger since 1s system pump should have enough psi to run two jets on one pump to cool the supercharger rotors and tighten the clearance between the rotors and casing. Now I have a few questions.
1. What would be the best jet placement for pre-blower, before the throttle body or after the throttle body?
2. What jet size would be best for pre-blower?
3. Also does aquamist sell the parts needed to run two nylon lines from one line? If yes, could yall provide part #s
4. Does aquamist sell a jet adapter to exchange different jet sizes quicker?
here's some pictures of the supercharger M45 blower, Thanks for your time!
