[keithmac]

I`m going to give it a go, got some material ordered to knock up a pair of jet holders, similar to Richards install on the Skyline.

My car runs out of boost at 6000+ rpm (only holds 12psi to redline due to small 9b turbos), so first measure of any sucess for me will be higher boost. I`ve got some 1/4 mile info to compare results also, so the next test will be the trap speed with pre-turbo injection.

I`ll try and get some good pictures of the compressor wheels before fitting the injection, to give a starting point for the condition before and after.

How my car/ system is set up I`ll have to be using a 0.9-1.0 nozzle on each turbo to keep my tune close, can always re-jig if it overcomes the turbos, if it runs well on 1.0 jetting I can directly compair the results to mylast 1/4 mile info as I`ll be injecting the same amount of water/methanol.