900 bhp system design? Whats best?

[norbs]

I want to make about 900 BHP on 94 octane gasoline. I am thinking of 30 psi boost and 6 X.4 nozzles from aqumist. The injector size is roughly 900 cc's on a 6 cyl 3.8 engine. Either controllerd from the 2d system with a map sensor or 2c run off the fifa controller. THe car is equiped with a large air/to air intercooler, Aftermarket ecu. Presently i can run about 19 lbs on 94 fuel with little detonation. IS this nozzle size correct or too much flow?