How can you identify each nozzle and how many can you run?

[spooldup]

I have the 2d system but only the 1s part of it is connected right now. I stuck one nozzle in and it works great. I am up to 20psi on race timing with no knock spraying 100% meth with klotz. My questions are how do you know wich size nozzle you are using? How many nozzles can effectivly be ran ran on one pump?

[JohnA]

Two nozzles mate.
Do a search, there are a few relevant threads around here.

[Richard L]

We have now a 0.3mm nozzle that flows approximately 75cc/min at 6 bar, one aquamist pump can run four of them and produce excellent atomisation.

The jet has an internal 25 micron filter but still advice you to purchase a main inline 30micron filter down stream of the original 100 micron filter.

It was designed for port injection applications.

[ubcnme]

Hi Richard whats the part # for the .3 mm aquamist jets I want to run 4 of them in my veh. I want to do a port water injection type of set up. where can I order the jet at I have a hard time finding it on the internet. :lol: