![]() |
|
#1
|
|||
|
|||
![]()
Here's a shot of my engine (haven't put the covers back on) with my custom accordian hose replacement to fit the 90mm MAF housing:
![]() Here's a shot of where I have the jets located, until I can get a spare intake manifold and do my 6-jet direct-port setup: ![]() Next the tank and pump location. You'll have to pardon the power wires all over, I'm using a distribution block that will also power my amps, and until I figure out exactly how I'm mounting them, I haven't bothered to mount the block yet: ![]() brain box: ![]() DDS3 gauge: ![]() and where I'm going to mount it, and a boost gauge, as soon as I can rig up a pod: ![]() |
#2
|
|||
|
|||
![]()
As usual, flawless installation, despite the AZ heat. Please post more pictures and any details you can, make this thread an informative one.
Do you have a picture of the FCM?
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
![]() Quote:
I'll get one tonight and post it up. Right now I'm enjoying the "stealth" aspect of the installation. It'll be better when I got direct-port, as you can't really see the intake manifold at all. |
#4
|
|||
|
|||
![]()
Do you have n ECU pinout diagram for me to produce a A6 specific wiring diagram for future A6/H6 users?
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
![]()
Sort of. I have a number of pdf files showing the wiring, but it's not all together on one sheet.
If you get me your email address, I'll send you what I have. |
#6
|
|||
|
|||
![]() Quote:
__________________
Richard L aquamist technical support |
![]() |
|
|