|
#1
|
|||
|
|||
when should the water be injected??
Hi ive just fitted aquamist to my MR2 and was wondering what boost level i should have the system activate at..
Currently the car is running 14psi and the water is activated at the factory set 10psi...... also.... which way do i turn the screw on the pressure switch to alter the activation point :? :? any idea's welcome :smile: |
#2
|
|||
|
|||
I don't know which way you turn the screw, but I think you'll just have to test around and see what boost level for activation works best for your set-up.
You're probably in the right area right now with the trigger at 10psi. -Craig |
#3
|
|||
|
|||
Cheer's mate... ill give a twiddle and see what happens
|
#4
|
|||
|
|||
You can install an LED across the terminals of the pressure switch mate. The activation point will be obvious then.
|
#5
|
|||
|
|||
Re: when should the water be injected??
Quote:
__________________
Richard L aquamist technical support |
#6
|
|||
|
|||
im injecting at 4psi on a trd supercharged 1.8l
__________________
http://img.photobucket.com/albums/v3...z/DSC00512.jpg |
|
|