![]() |
|
#1
|
|||
|
|||
![]()
Don't mind the pics I am no photographer.
3.2L motor, 12.5lbs of Boost, Vortech V2-SQ Si trim ![]() All the bits... ![]() Some tunes and a Howerton 1.25G tank ![]() ![]() PVM Bracket ![]() ![]() 1.0 Jet ![]() Howerton Trim ring ![]() |
#2
|
|||
|
|||
![]()
very nice install. Like the bracket and the right angle jet.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
![]()
Nozzles installed....
![]() |
#4
|
|||
|
|||
![]()
Just love those 90 degree banjoo fittings.
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
![]()
New stuff....Changed to a back lite LED, adding a 3rd nozzle in the SC volute.
![]() ![]() |
#6
|
|||
|
|||
![]()
very nice. You should take up photography, good pictures.
I believe you are lowering the boss.
__________________
Richard L aquamist technical support |
#7
|
|||
|
|||
![]() Quote:
![]() ![]() ![]() The height difference between tanks...and the new pump input swivel. ![]() |
#8
|
|||
|
|||
![]()
Looks like I can say I am done...for now
New adapter from Howerton Eng. As you can see it sits on top of the jet and allows provisions to feed the other two. ![]() ![]() And the final placement. 2X 0.7 nozzles and a single 0.3 in the volute. ![]() |
#9
|
|||
|
|||
![]()
I can't stop looking through those pictures repeatly. Work of art. Nice utilisation of thise cute little fittings from Howerton.
I aslo heard youn have good success with the controller reading the tec3 ECU. What next, armed with all those cooling jets. Boost to 25psi?
__________________
Richard L aquamist technical support |
#10
|
|||
|
|||
![]() Quote:
Not sure what is on the horizon...but I am thinking maybe 17-18psi would be a good place to be. |
![]() |
|
|