|
#1
|
|||
|
|||
08 WRX failsafe w/ HFS6 & GrimmSpeed EBCS
I'm using a GrimmSpeed 3-port EBCS and an HFS6. Would like to know the ideal way to utilize the failsafe on the HFS6.
Since this EBCS connects to factory harness and such, should I connect white and brown wires as I would with an OEM boost control? Also, is this diagram of HFS3 wiring applicable with the HFS6 as well? Thanks! |
#2
|
|||
|
|||
Re: 08 WRX failsafe w/ HFS6 & GrimmSpeed EBCS
As for the failsafe yes, just consider the GS unit to be the same as the OE unit for hooking up the wiring.
The connector on the HFS-6 is yellow, but the red/green/brown/white are all used the same. |
|
|