#1
|
|||
|
|||
best pre turbo mixture
good evening.
after reading the commends of this man I started driving pre turbo injection in the firs place. Quote:
Quote:
between the first en second stage there is no room for a intercooler and I like the results of my WMI with pre turbo injection so far. I want a second WMI system on board eats with a different mixture. one for pre turbo injection and one for post intercooler injection. but what would be the best pre turbo mixture to start with ? I would like to come to near isothermal compression as close as possible. I think: -methanol. -acetone. -isopropyl alcohol. -demineralised water. would be the best to start with. what proportions would work best ?
__________________
keep on modifying Last edited by GOFAST; 14-08-2015 at 10:59 PM. |
#2
|
|||
|
|||
Re: best pre turbo mixture
i like reading old treads on this forum.
to bad there so little activity these days. no one ????
__________________
keep on modifying |
#3
|
|||
|
|||
Re: best pre turbo mixture
Sure, it will make it more efficient.
Practical an easy maintenance, may be not so much. |
#4
|
|||
|
|||
Re: best pre turbo mixture
tnx for responding.
any idea for the mixture ?
__________________
keep on modifying |
#5
|
|||
|
|||
Re: best pre turbo mixture
I have had some great results on the 70 % M1 to 30% distilled water sprayed pre-turbo.
|
#6
|
|||
|
|||
Re: best pre turbo mixture
O.K. I'll start with that.
ever tried acetone or isopropyl alcohol ?
__________________
keep on modifying |
Thread Tools | |
Display Modes | |
|
|