Jet location on a turbo Focus...

[Blackwings]

Hi guys, just after some suggestions as to where I should locate the jet in my install?

I've got a 2.0 Focus (2002, UK) with 8:1 compression ratio, which'll be running around 15PSI on a GT25RS when it's been mapped.

Now my project is getting nearer completion, I need to start putting all the final parts together, one of which is placing the Aquamist jet...

Any suggestions please!?



The jet size I've got is 0.4mm... Seems to be a mixed opinion of where to fit it so I'm just looking for some advice as to where to put it on mine? Also, any suggestions as to what PSI I should have the WI activating at?

Thanks!