HFS-6 rev.1: known issues and technical helps

[Rene Barfred]

Originally Posted by Richard L

I have been informed by aquatec the pump pressure is set to 160psi in "dead head" condition. This means when there is flow, say around 1000cc/min, the pressure will drop down to ~120-125psi.

In order to reset the pressure to 160psi at 1000cc/min. You need to adjust the set screw (on the pumphead) with an allen key (1/16") as follows:
Wind in the screw (clockwise) until you hear a click. Then re-wind (counter-clockwise) 1 complete turn. This sets the system pressure to 160psi.

Future HFS-6 delivery will have a supplimentary insert in the user manual, instructing the above. Apologise for the noticing this earlier due to some mis-communication between Aquatec and us.

Hi Richard :smile:

So this means one has to do this before setting up the system and installing it ?? I was in the groupbuy, so I guess my pump will have this treatment ? thank's.

Rene
DENMARK