W/M Inj on Vag 2.0 TFSI

[vRSy]

hi there

I have a Mk2 Octavia vRS 2.0 TFSI, currently maxed out performance wise on the std internals and turbo @ about 270-280Hp, with stage 2+ remap, full exhaust system, intake, fuel pump and intercooler.

Im now looking into w/m injection but have found very little from info from the UK reference the installation and perfomance possibilities available.
So...im going to bombard you guys with questions

1-There are lots of kits available from the likes of snow perfomance, devils own, AEM, aquamist etc etc what would be the reccomendation to install or benefits of one kit over another?

2-What is the best method of controling the meth injection, boost or MAF activated.

3- what is the average amount of time to install a full kit start to finish, so i can get an idea of the labour charge id have to pay.

4-I have a custom map on my car at the moment, if i was to run water methanol on top of it without tweaking the map, would i still see gains in HP and torque.

5-My tuner has already said he'd be more than willing to tweak my map for me, to utilise the w/m inj. what sort of gains are you looking at when the map is tuned for it


6-storage of meth- i know you can utilise the std washer fluid container, but i use my windscreen wash alot so wouldnt want to waste the mixture. If i had a seperate container put in the boot, is it possible to have a quick release style container that can be released to remove the container from the boot when the w/m inj is turned off(should i need my boot)

7- does anybody have graphs to show before and after gains on their cars, so i can get an idea of if it will be worth the outlay.

Also is there anything i might not have considered

Cheers guys