waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 23-05-2010, 04:52 AM
proz07 proz07 is offline
Junior Member
 
Join Date: Jan 2010
Posts: 13
Default Re: Pre turbo + pre TB setup. No fmic? help needed.

what kind of ignition setup are you running cause unless you have zeus in there firing off lightning bolts you may have a hard time ignition 25% straight water honestly. if you read in the pre turbo thread youll se rice went to 50/50 meth for breakup and testing.

but again 100% water WILL NOT cool enough for you to remove the intercooler its evap temp is too high now if you run a mix of meth/water you can run without the intercooler but the only guy i read that did it i believe was running 100% meth and actually added a smaller intercooler after testing and playing around for the cruise low boost temps. let me see if i can locate the thread on it.

z
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 05:00 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.