waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 28-06-2014, 08:46 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

the pump is mounted in the trunk. the system has been running for three years no problem. then after sitting for a while, it became dormant.
the fcm is in the engine bay on the lower strut tower.

i checked voltage coming into the relay, the two small wires were reading a good 12-13v. the thick wires weren't reading anything. the fuse is not popped. the voltage going to the pump is 0.

this was all tested when the jumpers were all set for test mode.

i feel like the fcm is the problem.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:06 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.