Failsafe activation on a Blitz SBC I-D iii

[nicky turboboy]

Originally Posted by Howerton Engineering

Just taking a quick look at it the controller has a scramble boost function that allows a temporary raising and lowering of boost. On some controllers this can be actuated by an optional harness and a wire rather than the control panel buttons on the unit. Other than hacking the existing harness, you would probably need to look into the scramble function/optional harness closer, or buy a secondary solenoid(MAC Valve) to dump boost to wastegate pressure.

jeff i run Icolor EBC and i used MAC valve to cut pressure signal into the dual niod box.