Water level indicator

[leman_opc]

Originally Posted by Richard L

The water level led doubles up as a flow problem as well as low level indicator. Do you have a v12 gauge with two yellow leds?

Forgot to ask.. is vodka more readily available than methanol in Russia?

OK, I see, didn't know that (thought these are two separate failsafe mechanisms basicaly: once you have low water level you get "water level" led lighting and failsafe on, once you have flow problem you get "w.injection" led and failsafe on).

Yes, I have a gauge with 2 yellow leds (red leds on the flow bar). Not sure about the version though - will check whether it says anything on the back etc.

You may say vodka is more readily available as you just go to the grocery store and buy it. For methanol it's more complicated as it's applications are limited to technical purposes, so you should search for a source. The other question is that it's more expensive (the one I used was ca. GBP 4 per 0,5 litre bottle) and somewhat less effective - so in the end I'll have to go and find where to get meth ))) I thought it's the same in UK (except for probably higher vodka price)?