![]() |
#1
|
|||
|
|||
![]()
Hi all I have a Aquamist system with a HFS-3 controller and its recently broke. When I turn the ignition on immediately the thres light goes on and if I go check the FAV it begins to pulse softly if I turn the car on it then pulses much "harder" even at idle doesn't matter how I adjust the thres pot. These are the following test point values when car is off and just ignition is switched on.
Test point 5 +13.8V Test point 8 +13.3V Test point 23 +13.8V Test point 16 +0.61V Test point 15 +4.97V Test point 11 +9.07V Test point 30 +0.81V Anyone have any idea what the issue may be? |
|
|