waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 22-07-2016, 12:11 PM
iideaiidea iideaiidea is offline
Junior Member
 
Join Date: Aug 2013
Location: Spb
Posts: 16
Default The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS3.

I’ve been using HFS3 for a couple years and it’s been working without
any problems. Then I haven’t used the system for some time. Now when
trying to turn the system on, no backlights or flow sensor display
switch on, the only light still working is "water level".

The controller is connected correctly, there is a fuel injection load
indication. When closing with a “sys” jumper, the lamps on the
controller switch on and the flow control valve triggers, but the pump
still does not turn on. The pump is undamaged, I tested all the
connectors and wires, they are also fault-free.

A small note. When inserting the flat cable connector of the gauge
slowly and carefully, it briefly lights up the backlight and the flow
sensor display. When the connector is fully inserted, the only
indicator working is "water level".

What can I do? Can you help?
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:20 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.