#1
|
|||
|
|||
Help for Evo 6 Water Direct Port Injection
Goodmorning to everyone,
I'm Paolo and I am a tuner . We are looking to build a evo 6 for a friend. Our ecu is Emtron Kv8 and it can support water injection so i need only to buy the hardware part for make all running fine. We plan to run 4 nozzle into the intake manifold but i have some question regarding the fittings and strategy. My pump will be a 200psi pump from Aem which i already had from the past so i prefear to use it since is new. 1) Can nozzles be mouted upside spraying water from bottom to up? 2) I suppose to run only water, my boost will be max 30psi accross all the powerband. I have 4x1050cc injectors and max duty cicle will be 85% for safety reason. According to your calculator , i'll need 1050cc*4*85%* (12.5% water proportion) = So doing maths 446cc's . Rounded for excees according that there will be some losses so... 500cc divided between 4 nozzles. looking here i need 4x0.4mm B nozzle type. Can you confirm this for the moment? Then i do a Basket list with I also added items to my basket 4 nozzles with check valve 7meter 4mm hose 4 way hex manifold and a fitting to permit my 4way manifold accept 6mm (1/4") hose from aem pump Do i need more? Waiting for your fast reply Thanks a lot Paolo Last edited by ilcaso1990@gmail.com; 06-01-2017 at 05:22 PM. |
|
|