waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

Reply
 
Thread Tools Display Modes
  #1  
Old 10-05-2008, 01:33 AM
codyace codyace is offline
Junior Member
 
Join Date: Jun 2007
Location: Stroudsburg, PA
Posts: 1
Default Pump and Resovior Installation Idea on my 240sx

I'm goign to be running my Aquamist 2c setup in conjunction with my Jim Wolf Tech Ecu.

I was thinking about mounting the pump and tank in the trunk of the car, however was unsure as to if that was to great a distance for the pump to push water (essentially from the trunk to just beneath the front passenger headlamp, where the intercooler pipe is.

I wanted to mount the kit someplace near the actual pipe, however there is no room, this side of being exposed in the engine compartment (which I do not want)

Any help is appreciated!

Thanks!

-Cody Ace
__________________
Cody Ace - 1997 240sx - SR20 Power - 400whp/330 ft lbs
Reply With Quote
  #2  
Old 14-05-2008, 10:54 PM
keithmac keithmac is offline
Senior Member
 
Join Date: Mar 2005
Location: York / UK
Posts: 151
Default

I mounted the Aquamist pump in the boot on my last car and it worked well, have done the same again with a Shurflo pump in my GTO.
Best point is I have a 20l tank in the boot which makes filling less frequent, just check the level everytime I fill the petrol tank up.
__________________
VW Mk2 Golf 16VG60 - Mitsubishi GTO TT
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 09:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.