Injector pulse Pin 17

[Richard L]

This sounded like the pin 17 is picking up the wrong injector pulse signal. The system appeared to be working as it should.

OK, lets go a bit further....

1. Where are you picking up the "injector pulse" signal? Is it from the actural injector or ECU?
2. What type of fuel injector is it? 16 ohm, 10 ohm of 2.5 ohm?
3. Does the injector use a "resistror pack"?
4. Did you splice the wire from the ECU or at the fuel injector harness.
5. Important: Where are you picking up the 12V supply to the DSS3 junction board (pin24).