waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 28-04-2010, 02:14 AM
Evomoe Evomoe is offline
Junior Member
 
Join Date: Apr 2010
Posts: 5
Default Re: Gauge turning off for a little while?

I have the 2 ground wires running along side by side and then twisted together & crimped onto one lug. Should I run these wires away from each other and put seperate lugs on?

Yes it is coming on for roughly 4 seconds, but why would the failsafe trip and just cruising speed?


I'll double check the resistance from the chasis to the plug and see what OHMS its reading.

I have unpluged the float sensor but haven't driven around with it off to see if its the problem. Should the Yellow light come on straight away if I disconnect the float sensor?

Thanks for your help.
Cheers
Moe
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:36 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.