Yellow RJ45 Connector & 4 way power connector

[Richard L]

You can connect it to any +12v for testing purpose only. Keep the jets away from the engine internals.

It is not advisable to allow the yellow harness to see a +12V source before the fulew injector(+) receive 12V from the battery or ful pump relay.

I would like to have a go looking at the fiagram if oyu can send them to me (richard@aquamist.co.uk)

BTW, you will noit see a 12V on the injector(+) until the ECU i spowered up and ignition key on the pre-crank position.

[stevebez]

Originally Posted by Richard L

It is not advisable to allow the yellow harness to see a +12V source before the fulew injector(+) receive 12V from the battery or ful pump relay.

OK... so the yellow harness should see 12v last in the que if not using the injector source.

You have mail !