problems with FAV solenoid - no work, but getting very hot! ::fixed::

[softic]

Ok, if all harnesses connected and solenoid is connected as well - I see 13.8V on trnsistor pin #2, 0V on tr. Pin #1 and some small (looks like transistor control PWM voltage) 0.2-1.8V on trnsistor's pin #3 (right one on your PCB picture)
What if I will just connect transistor's pins 1 and 2?
I assume this will power the solenoid and open the valve constantly, right? Should I check this?