waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 02-07-2012, 09:57 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,941
Default Re: Effect of water's expansion on combustion pressure

When liquid water changes to vapor, the volume increase is over a thousand fold. Once it is in vapor form, it obeys the Boyles Law like any other gas. As temperature continues to increase so does the volume.

pV=mRT

p= observed pressure
V= total volume
m= mass
R= gas constant (gas specific)

If phase change of water makes little pressure difference, the steam engine will never work. The volume of the combustion chamber varies with crank angle, the pressure increase will vary with temperature, volume and position of the piston.

It is thermodynamic topic, a separate study of of Mechanical Engineering. Once you have familiar with the first and second law of thermodynamics, you can then apply it to the engine dynamics (Mechanical engineering).

Here is a good link to make the above clearer.
http://www.ohio.edu/mechanical/therm...Chapter2a.html

.
.
__________________
Richard L
aquamist technical support
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:00 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.