New Install STI failsafe issue

[Richard L]

yes, quite easy. You can just solder a bare wire across the resistor.

[streetking]

So I did the soldering and now the b light stays on all the time. I assume that's normal? Do my wl limit failsafe still work?

[Richard L]

This means the WL lower limited is reached. This is why we put a lower limit with the resistor. I have warned you about this,

[streetking]

I see. So now there's no low WL limit, meaning if I get a blockage the failsafe won't trigger?

[Richard L]

This is correct. The moment the "B" led lights up, the WL is disabled.

Do your x1.5 pre-amp configuration, things will change for the good.