![]() |
#18
|
|||
|
|||
![]() W0w been a while, but I'm going back over my wiring and wanting some clarification. Diagrams for the 2.7T Audi's have a white and orange wire to the N75, but in actuality it's white and brown from the HFS-3. Also the diagram shows the Blue wire to the MPS/MAP Sensor, but the documentation shows us using the orange wire. "http://www.aquamist.co.uk/HFS3/manual/HFS3-v3.0w.pdf" Page 18 So there is some confusion (again since it's been a while since I hooked all this up and just trying to validate everything since I'm getting a n75 short to ground for some reason. I think as of right now there is a yellow, orange, black wire out of the ECU RJ45 connector that are not being used. I'm very hopeful that Richard is still up and kicking!! Thanks Tory |
Thread Tools | |
Display Modes | |
|
|