|
|
|
|
#1
20-06-2016, 03:02 PM
|
|||
|
|||
Re: HFS4v3 on 2013 Mazdaspeed3
Quote:
What size Posi-Tap/Posi-Lock connectors are needed for connecting the harnesses to the ECU?
__________________
2013 MS3 Black Mica
GT3071R | HTP 3" Intake | Magnaflow CBE | Grimmspeed EBCS | Bosch 3 Bar MAP | AP v3 CS HPFP Internals | CS Catted DP | CS RMM | TR8L FMIC w/ JBR Piping HKS SSQV4 BPV | CS SSP | Swift Springs | DM Stage 3 OCC and PCV Plate | EBC Slotted Rotors w/ Yellowstuff Pads | NGK Iridium -1 Freektuned 350/365 @22psi Waiting to install.... TR8L Core/Aquamist HFS4/NGK -1 Plugs 
|
|
#2
21-06-2016, 12:06 AM
|
|||
|
|||
|
Re: HFS4v3 on 2013 Mazdaspeed3
Here is a photo of the board. It seems as though it's defaulted to 3.5bar MAP so all I should have to do is adjust the jumpers for 2.5x and I'll be set.
__________________
2013 MS3 Black Mica
GT3071R | HTP 3" Intake | Magnaflow CBE | Grimmspeed EBCS | Bosch 3 Bar MAP | AP v3 CS HPFP Internals | CS Catted DP | CS RMM | TR8L FMIC w/ JBR Piping HKS SSQV4 BPV | CS SSP | Swift Springs | DM Stage 3 OCC and PCV Plate | EBC Slotted Rotors w/ Yellowstuff Pads | NGK Iridium -1 Freektuned 350/365 @22psi Waiting to install.... TR8L Core/Aquamist HFS4/NGK -1 Plugs
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
