Replacing IC with water - Request For Comments (longish)

[robbilau]

Unfortunately I can't get EGT into that mix as I can only use one temp input, either air or EGT, at a time. Also, I don't have an EGT probe (yet). But I think I will be able to get a decent result this way

I should have a simple crossover tube in the next few weeks to start playing with - Flyin Miata is putting them into production imminently. I have a simple map prepared to start from which should allow a max of about 100 deg C cooling with some room to grow if the data on the ERL site is correct.

I'll report back as I make progress.