Hooking up an Aquamist pump to a Coolingmist nozzle

[Richard L]

Originally Posted by Shuasha

As a temporary thing until Richard sends some silicone adapters to the US, I installed one of the cooling mist nozzles in my car. The problem is that the nipple for that nozzle is much larger than the aquamist one, so I need some sort of adapter. Any ideas?

The silicon hose jet adaptor is designed to be used with aquamist nozzles only. I didn't realise at the time that you have a coolingmist system, who uses a completely different nozzle form us.

I am afraid it is not going to work at all. We use a M8x 0.75mm thread for our jet. If the adaptor is not suitable for you, woudl be mind send it to some one who has been asking for it badly for soem time (in the US) and we have run out.

Richard