|
|
|
|
#1
09-03-2007, 05:10 PM
|
|||
|
|||
Today I welded myself a water tank, I used 1.5mm thick stainless plate and a stainless closure, I didn't weld for long time so I had to warm-up little bit, but it turned out ok. I made couple mount points for the pump and accumulator. The tank can hold 10liter (2.64 gallon) water.
Front:  Back:  Front assembled:  Back assembled: 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
