waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 16-11-2007, 04:29 PM
Pit Viper Pit Viper is offline
Senior Member
 
Join Date: Feb 2006
Location: Phoenix, AZ
Posts: 70
Default

Quote:
Originally Posted by eunos1800
So had a better chance to play with it today.


I'm running the HSV connected to a Emanage Ultimate to control the water.


I used a spare placed in a bucket and ran the HSV at 80%dc.

The bar graph moves but it only moves at start up, after 1 sec or so the bar graph goes back to zero.



Have i not connected something correctly?
Check all your connections to make sure you are not leaking water under pressure. I had a similar situation, which turned out to be a loose connection at the flow sensor.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 12:15 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.