#11
|
|||
|
|||
Understood, opposit side from what I said. Between those pulleys is minimal gap, millimeter or so.
__________________
"They can order any color...as long as it is black" H.F. |
#12
|
|||
|
|||
Well, nice try.
One other possibility is to put another pulley in front of the water pump pulley and use a second belt to drive the s/c. The original belt (shorter) can now be used as it is unnecessary to go over the s/c pulley.
__________________
Richard L aquamist technical support |
#13
|
|||
|
|||
Can these pics help to better explain where should be extra pulley fitted?
__________________
"They can order any color...as long as it is black" H.F. |
#14
|
|||
|
|||
Try to draw the second pulley in front of larger one.
You will also need to put another pulley in front of the supercharger or move the s/c forward. In most cases, you should be able to obtain a longer s/c nose.
__________________
Richard L aquamist technical support |
#15
|
|||
|
|||
Good idea, didn't tought that way at all.
__________________
"They can order any color...as long as it is black" H.F. |
Thread Tools | |
Display Modes | |
|
|