Problem with HFS-3 ::fixed::

[RB5108]

Hi,

As you can see I'm knew to the forum and any help will be appreciated. I have a MK2 Focus RS that I have spent the best part of 18 months tuning and tinkering with. I thought I would be a little different and go with WI as it gave me good results on my Subaru many years ago...

I have gone through the quick start procedures and get stuck on testing of the water jets. The pump primes and is fine so i have water reaching the FAV however it says link "inj" and "sys" and you sholud see an instant cone of spray at the jet - I dont get this....

Also if i try to activate the system by F-IDC the system shuts down when i blip the thottle also I've noticed that my rev counter sticks at at what ever RPM it hits for about 10-15 seconds

My installaion can be seen here

http://www.focusrsoc.com/forums/topi...hard-pipe-kit/

Thanks in advance
Bryan