|
|
#16
11-03-2009, 07:33 PM
|
|||
|
|||
Richard,
I have rewired the +12v for the dds3 directly off of the ecu power up supply and have the following observation: 1-The flow gage has a hard time to start up, the illumination is flickering then a few seconds later gage is running. 2- The inj/idc led is lit up all the time. 3-When trying to run test mode the flow gage shuts on and off with no flow meter working. Yellow led is on all the time. Please advise. 
|
|
|
Threaded Mode