#1
|
|||
|
|||
size of water&temp
Smaller water particle makes more power. :lol: 10% more tested by g-tech.
|
#2
|
|||
|
|||
Any more specific data wouldn't go amiss.
How did you measure the particle sizes anyway? |
#3
|
|||
|
|||
Injection tube is 12 mm in diameter. Water is not visible when it exist. Flow rates are 50 to 150 ml per. min for 400hp engine. None turbo 351c . With no timing change. 40 more hp. :shock:
|
#4
|
|||
|
|||
Hard to see what sort of particle size we're talking here.
What was the pump pressure and what was the nozzle size? |
#5
|
|||
|
|||
size&water temp
1 1/2 psi. 034 nos jet. Injected under carb.
|
#6
|
|||
|
|||
1.5 psi is negligible pressure, can you really inject fine mist with that?
Do you mean 1.5bar? (still low though) |
#7
|
|||
|
|||
Re: size of water&temp
After 4 more years of BS. Just found out my g-tech under estimates rwhp.
You need the right volume of steam and temps need too be controlled. Last edited by maxc; 21-08-2011 at 01:27 PM. |
|
|