![]() |
#11
|
|||
|
|||
![]()
I tried to active the system today but the same issues i wrote you yesterday !!
But after i did some changes to the PWM unit from inside , it made the gauge not working at like yesterday , only the yellow light apeared in the gauge , then after 5 secs it off !!! So i think the gauge is damaged !! |
#12
|
|||
|
|||
![]()
1. Have you tried with the factory cable?
2. Unplug the blue harness and see if have made a difference (with original gauge cable) .
__________________
Richard L aquamist technical support |
#13
|
|||
|
|||
![]() Quote:
And nothing !!! Am afraied that the gauge damaged and PWM is failed !! I |
#14
|
|||
|
|||
![]()
You need to return the controller and gauge to us for repair. We don't charge but you have to pay shipping on both directions.
Email me: richard[at]aquamist.co.uk
__________________
Richard L aquamist technical support |
#15
|
|||
|
|||
![]()
Email was sent sir .. Thanks for your support
|
#16
|
|||
|
|||
![]()
Both gauge and controller were severely damaged.
It makes no difference which version of HFS-3 you have in the past. It will do the same damage.
__________________
Richard L aquamist technical support |
#17
|
|||
|
|||
![]()
problem solved
![]() we tried the system and it worked perfectly ![]() big thanks to richard for his help ![]() |
![]() |
|
|