STEAM or WATER Injection ?

[maxc]

Originally Posted by parmas

You say 325bhp without steam and 360bhp with steam.....

- Are these on a dyno?
- If yes, a graph worth a million !
- When testing the steam effect..... igntion timing, cam timing, fuel etc.. all is left as it is ?

used gtech meter. ignition timing, cam timing, fuel etc.. all is left as it is yes.

[maxc]

http://www.aquamist.co.uk/vbulletin/...ead.php?t=1620

[parmas]

Originally Posted by maxc

http://www.aquamist.co.uk/vbulletin/...ead.php?t=1620

Nice article and video !

Do you want to share with us in detail what the setup is about as the video is too dark to see well ?

[maxc]

Originally Posted by parmas

Nice article and video !

Do you want to share with us in detail what the setup is about as the video is too dark to see well ?

That is not my video. This is me. https://youtu.be/VZmPlTvv7tk
Cam lobe wore out in that engine. The next build the power valve leaked on cam breakin 5 minutes into it blowing blue smoke out the tail pipes. I no longer use carbs with power valves. Don't have money for fuel injection.

[parmas]

Originally Posted by maxc

That is not my video. This is me. https://youtu.be/VZmPlTvv7tk
Cam lobe wore out in that engine. The next build the power valve leaked on cam breakin 5 minutes into it blowing blue smoke out the tail pipes. I no longer use carbs with power valves. Don't have money for fuel injection.

Could explain what did you used for the steam injection setup?

[maxc]

See my #7 post in this thread. Simple gravity feed boiler with reservoir mounted on firewall solenoid turning on .030 jet too boiler. I never ran carb booster venturi feed setup.