#1
|
|||
|
|||
2009 Audi TTS IE intake manifold install thread
|
#2
|
|||
|
|||
Re: 2009 Audi TTS IE intake manifold install thread
Very nice work. You can swap the vent outlet to the other side. (patient, long screw to undo and do up)
Looks really neat.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: 2009 Audi TTS IE intake manifold install thread
Thanks any all feedback is appreciated. I was thinking that I would hear that the direct port feed was too long. I was hoping since the injectors had check valves it shouldnt matter?
|
#4
|
|||
|
|||
Oser Gauge Pod install
I used the OSER gauge pod but without cutting down the original vent and shorting it I would have had the A/C blowing around inside the dash. This would have made those other 2 center ducts not work very well at all. Since I live in Florida that wasn't an option. So I basically sawed the original vent stack shorter by the distance of the OSIR pod insert. Then I siliconed it all together. I drilled a hole in the side to let the wire into the vent.
|
#5
|
|||
|
|||
Re: 2009 Audi TTS IE intake manifold install thread
VERY NICE!
__________________
Richard L aquamist technical support |
#6
|
|||
|
|||
Re: 2009 Audi TTS IE intake manifold install thread
|
#7
|
|||
|
|||
Re: 2009 Audi TTS IE intake manifold install thread
Got any running results?
__________________
Richard L aquamist technical support |
#8
|
|||
|
|||
Re: 2009 Audi TTS IE intake manifold install thread
Yea, tuner got close to 20 degrees more of timing and it stops me from running out of fuel on my stock S3 injectors. Car runs like a raped ape so much I am moving up to a 6771 EFR twin scroll. I am running 50/50 by weight.
|
#9
|
|||
|
|||
Re: 2009 Audi TTS IE intake manifold install thread
"Raped ape"! Brilliant. This is how I will describe the performance benefits of Aquamist from now on, if you don't mind Richard. Thank you Brd Prey and nice job on the install.
|
#10
|
|||
|
|||
Re: 2009 Audi TTS IE intake manifold install thread
Beautiful installation...
I have one question, the charge pipe jet is deep enough so the spray is not impeded by the depth of the thread hole.
__________________
Richard L aquamist technical support |
|
|