#1
|
|||
|
|||
Reputable company for Water Injection Install
Hi All,
didn't know where to plonk this so just plonked it here could anyone suggest a reputable place in the UK, where i can get a Water Injection install carried out? I am based in the Midlands, however i dont mind travelling abit for the job to be done correctly. Am basically looking at the Aquamist 2C system with 2E gauge. I basically need a nice solid and clean installation. The car is a 550BHP+ MR2 Turbo and possibly more with the 1.06 Garrett turbo housing once its fully mapped. Hence i need solid failsafes in place along. Look forward to replies. Cheers |
#2
|
|||
|
|||
Re: Reputable company for Water Injection Install
Quote:
I know of a company in Luton, Bedfordshire called PTS. They know our product very well. The 2e is not in Production. The 2c can only work with third party management system. I think a 2d or 1s +DDS3 is a good choice. Richard
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Thanks Richard, i'll check them out. I will be running a Motec M400 so a 2c should be ok.
Thanks |
|
|