#11
|
|||
|
|||
Re: Pump problem
in this case, it has to be the controller.
Can youn check the soldering is good on the RJ11 socket.
__________________
Richard L aquamist technical support |
#12
|
|||
|
|||
Re: Pump problem
Yes all seems to be good
|
#13
|
|||
|
|||
Re: Pump problem
Is it normally that I have 12v on the green wire when I am on pr? cranck position??? The green wire is not for the inj-? I have a french RS4
|
#14
|
|||
|
|||
Re: Pump problem
The green wire is on the other side of the fuel injector coil. At pre-crank position, you should see a full 12V when the fuel injectors is not being pulsed.
Some vehicles switch off the +12v supply to the fuel injected if you don't crank the enigne for a preset period. This is for safety reasons. It appears this is a problem on ther relay driver. Please return the circut board back to me for checking.
__________________
Richard L aquamist technical support |
#15
|
|||
|
|||
Re: Pump problem
Ok let me know your adress and I send you that tomorrow
|
#16
|
|||
|
|||
Re: Pump problem
ERL Ltd
Iroko House Returns dept. Bolney Avenue Peacehaven East Sussex BN10 8HF England
__________________
Richard L aquamist technical support |
#17
|
|||
|
|||
Re: Pump problem
The controller is send :-)
|
#18
|
|||
|
|||
Re: Pump problem
Great, I will be looking out for it.
Ricgard
__________________
Richard L aquamist technical support |
#19
|
|||
|
|||
Re: Pump problem
I have received the unit on Thursday.
I just did some simple tests and cannot replicate the problem of the relay, the system switches on the relay positively without any problem. Since I have the unti back, I can flash in a more suitable flow table to suit your applciation. Can you tell me how many and what jet size you are using. I will send you a new relay just in case. Richard
__________________
Richard L aquamist technical support |
#20
|
|||
|
|||
Re: Pump problem
Can you make a visual check for me on the blue harness. The order of colour in the RJ11 connector should be Red, yellow, blue, black. Counting from the gauge side.
I think this can be the problem. Richard
__________________
Richard L aquamist technical support |
|
|